Servos

double ended servo horn aluminium construction 23 spline suits ko/sanwa 2 x M3 holes per arm

This is a replacement E-flite 3.5g Sub-Micro Digital Servo, and is intended for use with the E-flite A6M5 Zero 300 and Edge 540QQ 280 airplanes.

This is the E-flite DS35 3.5-Gram Digital Super Sub-Micro Servo. This high speed, precise centering digital servo is perfect for electric indoor sub-micro flyers, slow flyers, small park flyers, high performance 3D models, sub-micro electric helicopters, and hand launch gliders.

E-FLITE EFLRS601 GEAR SET: S60

Features Our Most Economical Standard Size Digital Servo Powerful Three-Pole Fettite Motor High Impact Karbonite Gears Top Ball Bearings Standard Performance Digital Circuit for Precise Centering and Holding Power Programmable Functions End Point Adjustments Direction Fail Safe Dead Band Speed (Slower) Data Save / Load Program Reset

Features Large Drum Wheel with 3.5 Revolutions of Travel Strong Karbonite Gear Train Dual Ball Bearing-Supported Output Shaft Water and Dust-Resistant Case Accessories Karbonite Gear Set | Link | Plastic Case Set | Link | Applicable Horns

Features: Combines leading edge technology with super high 12 bit (4096) resolution. Extremely strong unique steel gears ensure long-life and durability. Full aluminum case design provides for durability. Ideal for steering on rock crawlers, monster trucks, and 1/8th scale vehicles. Specifications: Torque @ 4.8v - 25.0kg/347.2oz-in Torque @ 6v - 30.0kg/416.67oz-in Speed @ 4.8v - 0.16 sec/60 deg Speed @ 6v - 0.13 sec/60 deg Dimensions L x W x H (mm): 40.3 x 20.2 x 36.4 Weight: 80.0g

Features: - Leading edge digital servo technology - High efficiency Brushless motor - Accurate and fast response - Super high resolution - Aluminium center case for improved motor cooling and total strength - Ball beared - Precision Metal gears

Features: - Leading edge digital servo technology - High efficiency Coreless motor - Accurate and fast response - Super high resolution - Aluminium case for improved motor cooling and total strength - Ball beared - Precision Metal gears Technical specifications: Servo Technology: Digital Low Voltage Input Voltage (V): 4.8V - 6.0V Servo Type / Size: Wing Motor Type: Coreless Motor Gear Material: Metal Gears Ball Beared: Ball Beared Servo Case: Aluminium Speed 60°/Sec @ 6.0V: 0.13 Sec/60° Torque kg/cm @ 6.0V: 8.0 Kg/cm Length (mm): 30.0 mm Width (mm): 10.0 mm Height (mm): 36.0 mm Weight (g): 29.0 g Connector type: JR Spline size: 21T Spline

This is the Savox SH-0262MG Super Speed Metal Gear Micro Digital Servo.

The SW-0241MG is a waterproof, large scale, and digital servo. It is metal-geared with an amazing amount of torque while capable of operating on high voltage.
Features: Ideal for 1/5 scale off road, large scale boat and aircraft applications Waterproof case design. Strong metal gear train for added durability. Specifications: Torque @ 6v - 30.0kg/416.6oz-in Torque @ 7.4v - 40.0kg/555.5oz-in Speed @ 6v - 0.21 sec/60 deg Speed @ 7.4v - 0.17 sec/60 deg Dimensions L x W x H (mm): 65.8 x 30.0 x 59.1 Weight: 200.0g

PRODUCT SPECIFICATIONS Size Category:Minis and MicrosType:DigitalApplication:Cyclic Servo: HelicopterTorque:9 oz-in @4.8V, 11.4 oz-in @6VSpeed:0.08 sec/60 deg @ 4.8V; .07 sec/60 deg @ 6V, at no loadLength:0.77 in (19.6mm)Width:0.32 in (8.15mm)Height:0.98 in (25mm)Weight:0.14 oz (4g)Bushing Or Bearing:BushingConnector Type:JST-ZHR connectorGear Type:NylonGear Material:NylonCurrent Draw Idle:2mA @ 4.8V; 0.18mA @ 6.0VCurrent Draw Stall:2.4mA @ 4.8V; 2.21mA @ 6.0V

Spektrum S401 Mini Servo SPMS401 is compatible with ECX01000, ECX01000T1, ECX01000T2, ECX01001, ECX01001T1, ECX01001T2, ECX01005T1, ECX01005T2

KEY FEATURES Performance linear long throw servo designed specifically for use with AS3X ultra micro heli's 13.5 mm servo throw Compact footprint JST-SHR Connector Single Bearing for friction free operation